Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads on the Mazda B3000 pickup truck?

Model: Mazda Mazda Various
Part: Brake drums and shoes

In this tutorial we can see how to replace the rear brake pads on the Mazda B3000 pick-up, a very simple and quick operation. First of all, park the vehicle on a flat surface and with the gear engaged, then release the handbrake, lift the rear side and remove the wheels. Then remove the drum, release the various springs and remove the old brake pads from the housing. At this point, we can clean any dirt residue present, place the new parts and reassemble everything following the reverse procedure.

Posted on 20 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Discs and Pads on a Mazda Millenia
How to Replace the Brake Discs and Pads on a Mazda Millenia
Mazda Mazda Various To replace the brake pads and discs on a Mazda Millenia, raise the car, remove the front wheel, and unscrew the two bolts holding the brake caliper, …
How to replace the headlights of the Mazda B-Series Truck
How to replace the headlights of the Mazda B-Series Truck
Mazda Mazda Various In this guide, we will see the main instructions on how to remove and replace the headlights of the Mazda B-Series Truck. First, move to the front of…
Replace the Brake Switch on the Mazda Miata in Minutes
Replace the Brake Switch on the Mazda Miata in Minutes
Mazda Mazda Various The electrical part of the car is among the most complex and vulnerable, and you often encounter issues with various switches. Among these is the bra…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos