Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Discs and Pads on a Mazda Millenia

Model: Mazda Mazda Various
Part: Brake rotors

Video tutorial

To replace the brake pads and discs on a Mazda Millenia, raise the car, remove the front wheel, and unscrew the two bolts holding the brake caliper, then move it aside. Remove the pads, position one in front of the piston, and use a clamp to compress it so the piston retracts.

Unscrew the two bolts holding the pad bracket and remove it. Take out the two screws securing the disc and screw one into the hole where the other two do not go, so that tightening it pushes the disc out. Once the disc is removed, fit the new disc and reverse the steps for reassembly.

Repeat the same procedure on the other side.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Mazda Mazda Various This brief guide provides the main instructions on how to remove and replace the front suspension on a Mazda Bongo. First, lift the vehicle and begin…
Mazda Mazda Various In this tutorial, you will see how to replace the rear brake shoes on a Mazda B3000 pickup, a very simple and quick operation. First, park the vehicl…
Mazda Mazda Various In this video, you will see how to disable the i-stop function on a Mazda. The i-stop function is the same as what is referred to as "Start & Stop" o…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos