Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor of the external rearview mirror of the Mazda 6

Model: Mazda 6 GJ, MK 3 - Years 2012-2024

In a few steps, we will see the process of disassembling and replacing the motor of the external rearview mirror adjustment of the Mazda 6. First, we open the front door and start disassembling and removing the door panel, unscrewing all the fixing screws and disconnecting the wiring of the window switch; then we unscrew the screws of the rearview mirror to remove it, then disassemble the entire adjustment and then also the motor, as shown in the video. At this point, we install the new mirror motor, reassembling everything!

Posted on 25 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror in the Mazda 6?
How to disassemble the external rearview mirror in the Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial we can see how to disassemble the external rearview mirror in the Mazda 6, an extremely simple and quick operation. First of all, we…
Replacement of External Wing Mirror
Replacement of External Wing Mirror
Mazda 6 (2002-2008 / GG, MK 1) To replace the external wing mirror, you need to remove the door panel: detach the triangular plastic cover located just behind the mirror; the trim …
Replacing Interior Rear-View Mirror on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Replacing the interior mirror on a Mazda 6? Remove the mirror and replace it with a new one. Enter the vehicle, unlock the mirror with a screwdriver …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos