Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Interior Rear-View Mirror on Mazda 6

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Rearview mirror

Replacing the interior mirror on a Mazda 6? Remove the mirror and replace it with a new one. Enter the vehicle, unlock the mirror with a screwdriver (insert the screwdriver into the plastic), grasp the mirror located on the front windscreen and slide it off the guide: slide the mirror from the rail welded to the windscreen. Take the new rear-view mirror, insert it into the rail on the windscreen, and slide it until it clicks into place. Always make the necessary adjustments with the vehicle off for your safety. Adjust the correct position of the mirror.

Updated on 27 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Interior Light Bulb Replacement
Interior Light Bulb Replacement
Mazda 6 (2002-2008 / GG, MK 1) To access the courtesy light in the cabin, open the sunglasses holder located above the internal rear-view mirror. You will find two hex screws at th…
How to replace the cabin filter of the Mazda 6 2018
How to replace the cabin filter of the Mazda 6 2018
Mazda 6 (2012-2024 / GJ, MK 3) If you want to replace the air filter inside the cabin of your Mazda 6 (2018), you just need to follow the steps described in this new mini guide ded…
How to Remove the Glove Compartment from a Mazda 6
How to Remove the Glove Compartment from a Mazda 6
Mazda 6 (2008-2012 / GH, MK 2) This guide provides step-by-step instructions on how to remove and replace the glove compartment in a Mazda 6. First, open the front passenger door a…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos