Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external rearview mirror in the Mazda 6?

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: Side mirror

In this tutorial we can see how to disassemble the external rearview mirror in the Mazda 6, an extremely simple and quick operation. First of all, we open the door on the side where we will be working, then we remove both the internal cover of the mirror and the cap inside the handle. We then unscrew all the indicated screws, pry along the perimeter of the panel with a plastic spatula and separate it from the door. At this point, all that remains is to disconnect the various connectors, remove the white cap and unscrew the fixing bolts of the mirror with a 10mm socket wrench.

Posted on 16 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of External Wing Mirror
Replacement of External Wing Mirror
Mazda 6 (2002-2008 / GG, MK 1) To replace the external wing mirror, you need to remove the door panel: detach the triangular plastic cover located just behind the mirror; the trim …
Replacing Interior Rear-View Mirror on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Replacing the interior mirror on a Mazda 6? Remove the mirror and replace it with a new one. Enter the vehicle, unlock the mirror with a screwdriver …
How to Remove the Glove Compartment from a Mazda 6
How to Remove the Glove Compartment from a Mazda 6
Mazda 6 (2008-2012 / GH, MK 2) This guide provides step-by-step instructions on how to remove and replace the glove compartment in a Mazda 6. First, open the front passenger door a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos