Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the internal rearview mirror of the Mazda 2

Model: Mazda 2 MK 3, DJ - Years 2014-2023
Part: Rearview mirror

Below we will discover the information that will allow us to disassemble and replace the interior rearview mirror of the Mazda 2. First, we get on board the car and start unscrewing the fixing screw found on the back of the mirror; then we pull the mirror forward to extract it from the plastic clip fixed on the windshield, as shown in the video. At this point, we install the new interior rearview mirror, properly fixing it on the clip and inserting the screw; finally, we manually adjust the angle of the mirror!

Posted on 1 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats in the Mazda 2?
How to remove the rear seats in the Mazda 2?
Mazda 2 (2014-2023 / MK 3, DJ) In this tutorial we can see how to remove the rear seats in the Mazda 2, an extremely simple and quick operation. First of all, we open both rear doo…
How to disassemble the front door panel of the Mazda 2
How to disassemble the front door panel of the Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) In this short guide we will see the instructions that will allow us to disassemble and remove the front door panel of the Mazda 2. First, we open the…
How to replace the heating resistor in the Mazda 2?
How to replace the heating resistor in the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) In this tutorial we can see how to replace the heating resistor in the Mazda 2, an extremely simple and quick operation. First of all, make sure that…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos