Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Mazda 2

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Side mirror

The instructions in this guide will show us how to disassemble and replace the external rearview mirror of the Mazda 2. First, we open the front door and start to remove the plastic cover behind the mirror, levering on the sides; then we unscrew the fixing screws of the mirror, using an 8 mm wrench, as shown in the video. Now we disconnect the electric connector of the glass adjustment to remove the mirror from the outside, replacing it with the new one; reassemble everything and finally adjust the glass!

Posted on 15 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing External Mirror Cover on Mazda 2
Removing External Mirror Cover on Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Today, in this video tutorial, learn how to remove the external cover of the side mirror on a 2010 Mazda 2 in simple steps. First, carefully pry off …
How to remove the internal rearview mirror of the Mazda 2
How to remove the internal rearview mirror of the Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) Below we will discover the information that will allow us to disassemble and replace the interior rearview mirror of the Mazda 2. First, we get on bo…
How do you remove the door panel of the Mazda 2?
How do you remove the door panel of the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) In order to remove the door panel of the Mazda 2, you need to loosen the screws that secure the piece to its housing: the screws that secure it are l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos