Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 2
    4. : Removing the Mazda exterior mirror cap 2

Mazda 2 - Video tutorial

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Outside rearview mirror
Operation: Removing the Mazda exterior mirror cap 2

Today we will see, in this video tutorial, how to remove the outer mirror shell of a 2010 Mazda 2, in simple steps. First of all, let's remove the rear-view mirror glass, levering the sides very gently; then with a pin punch we go to detach the cover of the rear-view mirror from all sides, in order to come out from the outside, as shown in the video. At this point we are going to replace any components with new ones and reassemble everything, applying the reverse procedure of disassembly!


Posted on 4 January 2024 by ScegliAuto



How to replace the low beam bulb of the Mazda 2.
Mazda 2 (2014-2023 / DJ, MK 3) To replace the front bulbs of the low beams on the Mazda 2, we begin by opening the hood, disconnecting the connector of the left bulb. Once the conn
How do you remove the door panel of the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) In order to remove the door panel of the Mazda 2, you need to loosen the screws that secure the piece to its housing: the screws that secure it are l
How to disassemble the exterior handle on Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Open the door concerned and observe the side (the one which can only be accessed with the door open). At the height of the handle you will notice a s

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos