Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Folding Mirrors on a Mazda CX-5 After a Car Wash or Heavy Rain

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Side mirror

See other generations:
Video tutorial

After a wash or a rainstorm, the electric mirrors may not open or close properly, or may move jerkily: the cause is likely water entering the closing mechanism, causing oxidation or temporary blockages. A quick solution (without disassembling the mirror) is to use a penetrating lubricant, such as WD-40. Spray a generous amount in the area of the mirror joint, both front and back; manually move the mirror back and forth to allow the product to penetrate well; repeat several times, wiping off any excess.

If it is necessary to disassemble the glass/mirror, move it all the way up and outwards, gently push outwards without pulling from the edge (which could break!); unclip the clips and the glass will come off, allowing you to see the motorised mechanism: Look for the cable pass-throughs with rubber seals: these are the holes to treat.

Insert the narrow nozzle of the spray directly into the holes of the cable seals; the lubricant will penetrate directly into the folding motor, displacing the water and lubricating the internal parts.

To reassemble the glass, reconnect any plugs, align the clips, and press firmly until you hear the clips click. Test the operation of the mirror.


Posted on 10 September 2026 by ScegliAuto


Related tutorials

How do you remove the folding rearview mirrors of the Mazda CX5?
How do you remove the folding rearview mirrors of the Mazda CX5?
Mazda CX-5 (2012-2017 / MK 1, KE) In the video guide presented here, in addition to understanding how to disassemble and assemble the adjustable external rearview mirror of a Mazda CX…
How to Replace the Cabin Filter on a 2014 Mazda CX-5
How to Replace the Cabin Filter on a 2014 Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) If you own a first-generation 2014 Mazda CX-5 and are wondering how to replace the cabin air filter, read this guide and follow the steps described. …
Checking and Storing Tyre Pressure on a Mazda CX5
Checking and Storing Tyre Pressure on a Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) In this guide, learn how to check and store the tyre pressure on your Mazda CX5. First, check the correct pressure on the label located on the driver…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos