Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program a new remote control in the Mazda CX-7?

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Key

In this tutorial we can see how to program a new remote control in the Mazda CX-7, an extremely simple and quick operation. To do this, we will need a working key. First of all, go inside the car leaving the driver's door open, then insert the key and turn the ignition on and off three times in a row. Then close and open the door three times in a row, press the unlock button on the new remote control twice, and repeat this step for all the remotes present. To exit programming mode, simply remove the key, reinsert it, and start the vehicle.

Posted on 7 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key shell of the Mazda CX-7
How to replace the key shell of the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) In this video tutorial, we will see the main steps that will allow us to disassemble and replace the shell of the remote control key for the Mazda CX…
How and when to replace the timing chain of the Mazda CX-7 2.3
How and when to replace the timing chain of the Mazda CX-7 2.3
Mazda Cx 7 (2006-2012 / MK 1) In this guide, we will see the main instructions that will allow us to disassemble and replace the timing chain of the Mazda CX-7 2.3; the timing cha…
How to Remove the Door Panel on a Mazda CX-7
How to Remove the Door Panel on a Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) Below are the steps that will allow you to remove and replace the front door panel of the Mazda CX-7. First, open the front door and start unscrewing…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos