Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key shell of the Mazda CX-7

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Key

In this video tutorial, we will see the main steps that will allow us to disassemble and replace the shell of the remote control key for the Mazda CX-7, as well as the CX-9, Mazda 2, Mazda 3, Mazda 5, and Mazda 6. First, we take our remote control and start by removing the small plastic cover on the side; then we unscrew the small screw at the back, removing the cover of the remote control, as shown in the video. At this point, we remove the battery and then the physical key; we then remove the electronic board and the chip, transferring everything to the new key shell!

Posted on 30 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Mazda CX-7?
How to Replace the Front Headlamp Bulb on the Mazda CX-7?
Mazda Cx 7 (2006-2012 / MK 1) To replace the front headlamp bulb on the Mazda CX-7, remove the rivets located inside the wheel arch corresponding to the headlamp that needs the bu…
How to Replace the Key Fob Battery of the Mazda CX-7?
How to Replace the Key Fob Battery of the Mazda CX-7?
Mazda Cx 7 (2006-2012 / MK 1) In today's video tutorial, you will learn how to disassemble and replace the battery of the remote key fob for the Mazda CX-7 in simple steps. First,…
How to replace the injectors on a Mazda CX-7?
How to replace the injectors on a Mazda CX-7?
Mazda Cx 7 (2006-2012 / MK 1) To replace the injectors on a Mazda CX-7, open the bonnet to access the components inside the engine bay: you will need to completely remove the inta…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos