Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Mazda CX-30 remote control?

Model: Mazda Cx 30 , MK 1 - Years 2019-2026
Part: Key

In this tutorial we can see how to replace the battery of the Mazda CX-30 remote control, an extremely simple and quick operation. To do this, we will need a small screwdriver with a flat tip and a replacement battery of type CR2032. First of all, insert the tip of the screwdriver into the side slot of the remote control, then lever and separate the rear door. Then remove the circular cap just released, remove the old battery and insert the replacement, being careful to respect the polarity. To reassemble everything, just follow the reverse procedure.

Posted on 24 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Mazda CX-30 remote control?
How do you replace the battery of the Mazda CX-30 remote control?
Mazda Cx 30 (2019-2026 / , MK 1) .. In order to replace the battery of the Mazda CX-30 remote control, you need to use an object to pry off the back panel of the device: once this panel.. …
How to replace the remote control battery of Mazda CX-30?
How to replace the remote control battery of Mazda CX-30?
Mazda Cx 30 (2019-2026 / , MK 1) .. tutorial we can see how to replace the Mazda CX-30 remote control battery. To make the replacement, we need a CR2032 replacement battery and a small.. …
How to disassemble the remote control and access the battery of the Mazda CX-30
How to disassemble the remote control and access the battery of the Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) Disassembling and replacing the battery of the key remote for the Mazda CX-30 is really very simple and does not require the use of special tools. Fi…

How to Remove the Dome Light in a Mercedes C-Class

In this video, see how to replace the bulb or LED in the dome light of a Mercedes C-Class. Using a screwdriver or plastic trim tool, pry between the dome light cover and its perimeter (without breaking the plastic), remove the grille from the dome light, and then take out the clear plastic cover. Replace the damaged bulb with a new one (same size and voltage). Reinstall the plastic cover in its housing (press it in with your hands until the tabs are fully secured). Test the light's proper functioning before reinstalling the piece.

Watch the video!


by ScegliAuto

More videos