Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part:

To reset the tire pressure warning light that appears on the instrument panel of the Mazda CX-5, you need to inflate the tires to the recommended pressure value: this value will be shown on the sticker attached to the driver's side door pillar. Once the tires have been inflated, you can connect a diagnostic tool to the vehicle's OBD port: you will then need to select the specific car model and its corresponding version. By following the instructions displayed on the screen, you will see that the warning light will disappear completely from the display.

Posted on 5 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to resetting the tire pressure warning light on the Mazda CX-5
Guide to resetting the tire pressure warning light on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Today's main information will show us how to reset the tire pressure monitoring system (TPMS) light on the Mazda CX-5; before performing the reset, i…
How to reset the tire pressure light in the Mazda CX-5?
How to reset the tire pressure light in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial we can see how to reset the tire pressure light in the Mazda CX-5, an extremely simple and quick operation, to be performed only onc…
How to reset the tire pressure monitoring system on Mazda CX-5
How to reset the tire pressure monitoring system on Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Check the pressure: Make sure that the tire pressure is at the recommended level, which you can find on the label located on the door pillar. Dashboa…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos