Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Mazda CX-5, press and hold the dedicated button on the left side of the dashboard, next to the steering wheel. The button must be pressed while the instrument cluster is off; while continuing to hold it, insert the ignition key and turn it to the on position. After a few seconds, you will notice that the light turns off, at which point you can release the button. To confirm the reset, turn off and then turn on the ignition again.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Mazda CX-5?
How to reset the tyre pressure warning light on the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To reset the tyre pressure warning light, first inflate the tyres until they reach the pressure indicated on the sticker on the driver's door pillar.…
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) When a tyre (or more than one) has a pressure that is too low compared to the standard, whether due to a puncture or simply being deflated, the tyre …
How to reset the TPMS light on the 2019 Mazda CX-5
How to reset the TPMS light on the 2019 Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Today we will explain how to reset the tire pressure warning light on a 2019 Mazda CX 5 vehicle. To reset the warning light, we need to press the INF…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos