Do it yourself
| ||||
|
Mazda CX-5 - Video tutorial
Model: Mazda CX-5
MK 1, KE
- Years 2012-2017 To jack up our Mazda CX5 and be able to work, for example, to change a tire safely, it is necessary, first of all, to place the car on a surface and immobilize it by activating the handbrake. Now, we place two stops in the wheel, not affected, on the side where we will use the jack. At this point, we position the jack near the wheel to be replaced and raise the machine. Once raised, we place a fixed support under the car, in correspondence with the wheel to be replaced. This way, we can safely replace the tire. Once the operation is finished, we carry out all the operations seen, proceeding in the opposite direction, to put everything back in its previous state.
Posted on 1 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |