Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Side Indicator Bulb

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Side marker bulb

To remove the side indicator light, you need to remove the wheel arch cover: it may be helpful to lift the vehicle to unclip the retaining clips along the edge of the wheel arch; once access to the inside of the wing is created, press on the fixing tab of the light to remove it; disconnect the connector and replace it with a new one, connecting the plug and securing it to the wing, taking care not to damage the tab during installation. Then reposition the retaining clips along the edges of the wheel arch.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Indicator Bulb on a Mazda 3
Replacing the Front Indicator Bulb on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Today, this guide provides instructions to dismantle and replace the front indicator bulb on a Mazda 3. First, unscrew the fastening screws of the fr…
Replacing Indicator Light on Mazda 3
Replacing Indicator Light on Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Here’s how to disassemble the indicator light on a Mazda 3. Use a lever between the indicator light and the car's body (without damaging the bodywork…
How to replace the fog light bulbs on a Mazda 3
How to replace the fog light bulbs on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) In this video, we see how to change the fog light bulb of a Mazda 3 MK1: we cannot remove it from the front, but we have to work from underneath, rem…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos