Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Manufacturer's Emblem

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Manufacturer emblem

This video is currently unavailable

If you wish to replace the manufacturer's emblem, proceed as follows. Use a hot air gun to avoid damaging the bodywork, positioning it near the logo to soften the adhesive.

Lever between the logo and the bodywork with a plastic tool, forcing it in several places until it comes out of its seat. Alternatively, use a nylon wire to remove the adhesive.

Clean the bodywork thoroughly with a solvent to remove any glue residue. At this point, simply remove the protective film, position the emblem, and push it into its seat.

Follow the same procedure for all other logos.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Disassembling the Front Bumper
Disassembling the Front Bumper
Mazda 3 (2009-2013 / BL, MK 2) The front bumper consists of an outer cover matching the car's body colour and an internal reinforcement housing the black plastic impact absorber an…
How to reset the oil light in the Mazda 3
How to reset the oil light in the Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) In today's video, we will see how to reset the engine oil light in Mazda's compact car, the 3. First, it is recommended to perform this operation onl…
How to Programme the Remote Key for a Mazda 3
How to Programme the Remote Key for a Mazda 3
Mazda 3 (2013-2019 / BN, MK 3, BM) Today, we will go through the instructions to programme the remote key for a Mazda 3, as well as for other models from the manufacturer. First, get i…

Other guides you may be interested in

Location of the Jack and Spare Wheel of the Toyota Yaris

In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips. The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other.

Watch the video!


by ScegliAuto

More videos