Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the TPMS Light on a Mazda 3

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

In this very brief video guide, you will see the procedure needed to reset the tyre pressure warning light, known as the TPMS light, on a second-generation Mazda 3, produced from 2009 to 2013. This vehicle does not have a specific procedure to reset this light; you only need to ensure that all four tyres are at the correct pressure.

Once this is done, the light will automatically turn off. The correct pressure is indicated by the manufacturer and is found on a sticker located on the driver’s door pillar.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Replace the Temperature Sensor on a Mazda 3 2.3L
How to Replace the Temperature Sensor on a Mazda 3 2.3L
Mazda 3 (2009-2013 / BL, MK 2) Today, you will see the main instructions that will allow you to remove and replace the temperature sensor on the Mazda 3 2.3L by following these sim…
How to reset the tire pressure warning light on the Mazda 3
How to reset the tire pressure warning light on the Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) The tire pressure warning light indicates a possible loss of pressure or puncture in one or more tires; let's see how to reset the TPMS sensors on th…
How to Reset the Tyre Pressure Light on the Mazda 3
How to Reset the Tyre Pressure Light on the Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) Today, let’s discover how to reset the tyre pressure light on the Mazda 3; before resetting the TPMS sensors, ensure all four tyres are at the correc…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos