Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part:

Today, let’s discover how to reset the tyre pressure light on the Mazda 3; before resetting the TPMS sensors, ensure all four tyres are at the correct operating pressure. Then, get into the vehicle and turn on the instrument panel; next, press and hold the tyre pressure reset button located at the bottom left of the dashboard for a few seconds, as shown in the video. Once the light has reset, turn off the instrument panel and then start the engine.

Posted on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure on a Mazda 3
How to Reset the Tyre Pressure on a Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) To reset the tyre pressure on a Mazda 3, start by adjusting the tyre pressures to the values indicated by the manufacturer (see the label on the door…
How to reset the tire pressure light on the Mazda 3
How to reset the tire pressure light on the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) The following steps will explain the procedure for resetting the tire pressure warning light on the Mazda 3; before resetting the TPMS sensors, it is…
How to Reset the Tyre Pressure Warning Light on a Mazda 3?
How to Reset the Tyre Pressure Warning Light on a Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) To reset the tyre pressure warning light on a Mazda 3, first inflate all the tyres to the pressure indicated on the sticker affixed to the driver's d…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos