Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Replace the spark plugs on the engine

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Spark plugs
Operation: Replace the spark plugs on the engine

Purchase spark plugs suitable for the type of engine. Gently remove the plastic cover protecting the motor by simply lifting it upwards. In order not to confuse the cables, proceed by disconnecting only the first spark plug. Using a size 10 wrench, unscrew the sealing nut of the first spark plug and slide the pipette upwards. At the bottom of the cockpit is the first candle. Before proceeding with disassembly, carefully clean the pits with compressed air to eliminate any dirt that could fall into the combustion chamber. Using the special spark plug wrench, which has a rubber coupling device, gently insert it on the spark plug head and unscrew it. Perform carefully so as not to drop foreign bodies into the pit. Replace the spark plug with one of the same model by carefully inserting it into the well, always using the special wrench and turning it gently, checking that it is screwed well without forcing.


Posted on 17 July 2023 by ScegliAuto



How to replace the spark plugs of the Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) How to disassemble damaged spark plugs? Let's see how the spark plugs are removed from inside the engine compartment of a Mazda 3. We lift the front
How to replace the spark plugs on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Before we can start, we will have to go to open the front hood of our Mazda 3. So let's start by disassembling and removing the air filter block, uns
How do you replace spark plugs on Mazda 3?
Mazda 3 (2003-2009 / BK, MK 1) To be able to replace the spark plugs on the Mazda 3, you need to go and open the bonnet, so that you can access the components inside the engine com

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos