Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Wiper Blades

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Windshield wipers

The mechanisms that hold the wiper blades in place can often be cumbersome, but knowing how to proceed can resolve the issue in just a few minutes. Here’s how to do it. Lift the wiper arm and position the blade at a right angle to the arm. Press the lever to release it and remove the blade by pulling it downwards first, then detach it. Obtain the appropriate replacement and refit everything in reverse order. Ensure proper fastening to avoid any instability while driving and during use in rain.

Updated on 9 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Engine Oil, Oil Filter, and Wiper Blade Replacement
Engine Oil, Oil Filter, and Wiper Blade Replacement
Mazda 3 (2009-2013 / BL, MK 2) This tutorial illustrates how to replace the engine oil in the first part. Use a jack (included with car accessories) to lift the vehicle off the gro…
Windscreen Wiper Blade Replacement
Windscreen Wiper Blade Replacement
Mazda 3 (2009-2013 / BL, MK 2) Lift the wiper arm, rotate the wiper blade's hook 90° and push it down to detach it. Be careful not to damage the windscreen with the wiper arm witho…
How to replace the fog light bulbs on a Mazda 3
How to replace the fog light bulbs on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) In this video, we see how to change the fog light bulb of a Mazda 3 MK1: we cannot remove it from the front, but we have to work from underneath, rem…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos