Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Installing the Rear Shock Absorbers

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Shocks

Shock absorbers are a somewhat complicated part of the car to replace, but for the rear ones, it is just a matter of tightening. The rear shock absorbers are secured at the top of the bodywork with bolts, while at the bottom, they are fixed to the rear axle. To remove them, unscrew the bolts that secure the top of the shock absorbers to the upper body frame and those that secure the rear part of the shock absorber to the rear axle. For installation, reverse the procedure and tighten the bolts.

Updated on 9 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Front Shock Absorber Replacement
Front Shock Absorber Replacement
Mazda 3 (2003-2009 / BK, MK 1) To replace the front shock absorbers, first obtain the appropriate clamps to compress the spring and then remove the support from the shaft; start by…
How to Replace the Rear Shock Absorber
How to Replace the Rear Shock Absorber
Mazda 3 (2003-2009 / BK, MK 1) To replace the rear shock absorber, first lift the car on a ramp. Then, remove the wheel by unscrewing the bolts that hold it in place. The shock abs…
Front Shock Absorber and Link Replacement
Front Shock Absorber and Link Replacement
Mazda 3 (2003-2009 / BK, MK 1) Lift the vehicle on suitable axle stands, remove the front wheel; disconnect the speed sensor and the brake fluid pipe from the shock absorber suppor…

How to Remove the Bonnet on a Smart Fortwo

To open the front bumper of the Smart Fortwo for bulb maintenance, follow these steps: open the plastic levers located at the sides of the front grille with your hands. Once the front plastic is free, lift it upwards with your hands, then remove it from the bodywork as shown in the video. After removing the mentioned piece, replace the damaged bulbs. To reassemble, secure the plastic cover at the front of the car and then at the bottom. Finally, close the bonnet release levers with your hands.

Watch the video!


by ScegliAuto

More videos