Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs in Your Car

Model: Mazda Rx 8 MK 1 - Years 2003-2012
Part: Spark plugs

The spark plug is located at the heart of each cylinder and provides the spark that ignites the air-fuel mixture. It is therefore an essential component of the ignition system. Faulty spark plugs can cause the engine to lack power, produce excessive emissions, and lead to increased fuel consumption. To change the spark plugs, disconnect the negative terminal of the battery and wait for the engine to cool before removing them. To unscrew them, grip the spark plugs by the rubber cap with your fingers or use long-nose pliers if necessary. It is advisable to mark each spark plug lead and one corresponding to the cylinder to know how they were connected, avoiding mistakes when installing the new ones.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the spark plugs on a Mazda RX-8?
How do you replace the spark plugs on a Mazda RX-8?
Mazda Rx 8 (2003-2012 / MK 1) To replace the spark plugs of the Mazda RX-8, you need to open the hood so that you have access to the top of the engine block. Here you will find th…
Replacing Spark Plugs and Leads
Replacing Spark Plugs and Leads
Mazda Rx 8 (2003-2012 / MK 1) To access the ignition coils, you need to remove the air filter housing (it is simply clipped onto rubber supports. Disconnect the connectors and hos…
Improving Engine Performance
Improving Engine Performance
Mazda Rx 8 (2003-2012 / MK 1) AccessPort Manager is used to transfer maps from your computer to your AccessPort. Installing this kit is very simple; connect the supplied cable bet…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos