Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing an Aux Input Adapter for Car Radio

Model: Mazda Mpv LW - Years 1999-2006
Part: Accessory kit

To install the Aux input adapter for iPod, iPad, and iPhone, first remove the original car radio. Start by removing the plastic trim around the instrument panel and the radio itself (use a plastic lever to detach it after unscrewing the screws along the inner edge of the instrument panel).
Then, unscrew the mounting screws of the radio and pull it forward from its slot: behind the radio, there is a socket to insert the adapter. Connect the adapter socket, make all necessary configurations, and position the wiring to bring the Aux input to the most convenient location.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing a Newly Purchased Stereo
Installing a Newly Purchased Stereo
Mazda Mpv (1999-2006 / LW) To start, you will need three items: the new stereo, the plastic fascia where the radio will be inserted, and the radio itself. Begin at the dashboar…
Car Radio Removal Instructions
Car Radio Removal Instructions
Mazda Mpv (1999-2006 / LW) To remove the car radio, you need to take off the trim surrounding it, which includes the air vents and the dashboard covering: adjust the steering w…
Replacement of Front Suspension Wishbone Ball Joint
Replacement of Front Suspension Wishbone Ball Joint
Mazda Mpv (1999-2006 / LW) Once the vehicle is lifted on a ramp, it is easy to check the play in the wishbone ball joint: unscrew the mounting bolt of the joint from the hub an…

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos