Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Mazda 2

Model: Mazda 2 MK 3, DJ - Years 2014-2023
Part: Headlight bulb

To replace a blown front headlamp bulb on this vehicle, follow the simple instructions below. First, open the bonnet and locate the headlamp with the blown bulb. At the back of the headlamp unit, there is a rubber cover that needs to be removed. Next, disconnect the steel clip securing the bulb holder to extract it. Carefully take the new bulb, avoiding touching the glass with your fingers, and position it in its housing. Reattach the steel clip and finally replace the rubber cover. The job is complete.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb in a 2014 Mazda 2
How to Replace the Front Headlight Bulb in a 2014 Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) If you own a 2014 Mazda 2 and want to learn how to correctly and independently replace the front headlight bulb, follow these steps. First, park the …
How to Replace the Dipped Beam Bulb on a Mazda 2
How to Replace the Dipped Beam Bulb on a Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) To replace the front dipped beam bulbs on a Mazda 2, start by opening the bonnet, then disconnect the connector for the left bulb; once the connector…
How to Replace the Bulb on a Mazda 2
How to Replace the Bulb on a Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) In today's article, we will see how to replace the front headlamp bulb on a Mazda 2. First, lift the bonnet and secure it with the appropriate suppor…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos