Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the I-stop System on Mazda Biante

Model: Mazda Biante MK 1 - Years 2008-2018

Open the hood and locate this switch, just below the opening. Our YouTuber has provided a diagram that we will see. We need to find this screw and note that there is a lever. What you want to do is loosen the screw without removing it completely. After loosening the screw, push the lever back from the center, and then tighten it again. What you are doing is actually loosening this screw and then moving the lever inward away from the center when the level cannot be touched, it will not activate the stop light, and there the stop will be permanently disabled. This is the final position, it has been moved as far as possible to tighten the screw, and that's it.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on the Mazda Biante
Where to Find the OBD Port on the Mazda Biante
Mazda Biante (2008-2018 / MK 1) If you still can't find the OBD port on your Mazda Biante after several attempts, don't worry. Just follow these instructions to clear up any doubts.…
How to Replace the Battery in a Mazda Biante
How to Replace the Battery in a Mazda Biante
Mazda Biante (2008-2018 / MK 1) Follow this guide to remove and replace the battery in your Mazda Biante. First, open the hood of your vehicle and start by removing the plastic cove…
How to Replace the Cabin Air Filter in a Mazda Biante
How to Replace the Cabin Air Filter in a Mazda Biante
Mazda Biante (2008-2018 / MK 1) In today's video, we will see how to replace the cabin air filter in a Mazda Biante. First, access the vehicle from the passenger side. At this point…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos