Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Replacement of window control push-button panel

Mazda Cx 7 - Video tutorial

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Push button
Operation: Replacement of window control push-button panel

The door panel must be removed in order to use the window control panel, which also integrates the controls for adjusting the external rear-view mirrors; then start by removing the cap that protects one of the fixing screws inside the seat of the opening handle and then unhook the frame that houses the handle itself; remove the covering behind the external rear-view mirror and the cap inside the handle located just behind the push-button panel; then lever along the edge of the panel to release the pressure clips and remove the panel by disconnecting the sockets; at this point it is possible to unscrew the fixing screws of the push-button panel and replace it.


Posted on 12 September 2023 by ScegliAuto



Window lifter motor replacement
Mazda Cx 7 (2006-2012 / MK 1) In order to replace the window lifter motor, it is first necessary to remove the door panel: a first screw is located inside the handle of the panel
Replacement of the car window motor
Mazda Cx 7 (2006-2012 / MK 1) The first step in replacing a window motor is to purchase a new one at an auto parts store. The replacement procedure is simple, just follow the sugg
How to replace the remote control battery for remote control.
Mazda Cx 7 (2006-2012 / MK 1) So guys first of all let's start by saying that replacing the battery in the remote control remote control is a very simple operation that can be don

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos