Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the shift lever boot in the Mazda 3?

Model: Mazda 3 MK 1, BK - Years 2003-2009
Part: Shifter boot

In this tutorial we can see how to replace the gear shift knob cover in the Mazda 3, a very simple and quick operation. First of all, go inside the car, then lift the center armrest, grab the plastic cover from the back side and, pulling it upwards, unclip it from the base. Then unscrew the knob from the shaft, remove the frame containing the cover and separate the cover by unscrewing the four fixing screws. At this point, all that remains is to place the replacement and reassemble everything following the reverse procedure.

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the gear shift knob of the Mazda 3
Replacement of the gear shift knob of the Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) In a few simple steps, we will see how to disassemble and replace the gear shift knob and its boot on the Mazda 3. First, get into the car and start …
How to remove the gear shift knob of the Mazda 3
How to remove the gear shift knob of the Mazda 3
Mazda 3 (2013-2019 / BM, MK 3, BN) If you want to find out how you can disassemble the gear knob of your Mazda 3 on your own, just read the following guide and follow all the steps des…
How to disassemble the air conditioning console in the Mazda 3?
How to disassemble the air conditioning console in the Mazda 3?
Mazda 3 (2003-2009 / MK 1, BK) In this tutorial, we can see how to disassemble the air conditioning console in the Mazda 3, an extremely simple and quick operation. First of all, m…

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos