Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Tail Light on the Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Today's guide will show you the procedure for removing and replacing the tail light and its bulbs on the Mercedes E-Class. First, open the trunk lid and start by removing the plastic side cover; then, unscrew the tail light screws and disconnect the electrical connector for the lights, as shown in the video.

At this point, replace the entire tail light or the stop bulbs if necessary, ensuring they have the same fitting. Reinstall the tail light and check the operation of the bulbs by following the video tutorial to the end.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlight Bulbs on the Mercedes E-Class
Replacing the Rear Headlight Bulbs on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. the rear headlight bulbs on the Mercedes E-Class. First, open the trunk and start by removing the rear cover to access the headlight bulbs. Then,.. …
How to replace the rear headlight bulb of the Mercedes E-Class
How to replace the rear headlight bulb of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. bulbs of the rear headlight of the Mercedes E-Class. First, we open the rear trunk door and start removing the side carpet lining, removing the clip;.. …
Disassembly of the rear door panel of the Mercedes E-Class
Disassembly of the rear door panel of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the rear door panel of the Mercedes E-Class. First, we open the rear door of the car and start removing the plastic covers to access the panel.. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos