Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the rear door panel of the Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble the rear door panel of the Mercedes E-Class. First, we open the rear door of the car and start removing the plastic covers to access the panel screws, then unscrew them with a torx key or screwdriver; then we unscrew the additional screws located on the sides, detaching the door panel (levering), as shown in the video.

At this point, disconnect the electrical connector of the window button and the handle cable; finally, reassemble the door trim!


Posted on 28 September 2025 by ScegliAuto


Related tutorials

Mercedes Classe E (2009-2016 / W212) .. how to remove the door panel of a Mercedes E-Class model W 212. To remove the door panel, open the front door that needs disassembly. Using a flathead.. …
Mercedes Classe E (2009-2016 / W212) .. To replace the speakers in a Mercedes E-Class, use a tool like a screwdriver to pry the panel away from the door. Once the corresponding panel.. …
Mercedes Classe E (2009-2016 / W212) .. disassemble the rear door panel on a Mercedes E-Class? Let's see how to proceed in this video. Before starting the disassembly, disconnect the battery.. …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos