Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Rear Light of the Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Today's main instructions will show you how to remove and replace the rear lights of the Mercedes A-Class. First, open the trunk lid and start by removing the plastic side cover to access the inside of the light assembly; unscrew the plastic screw and disconnect the bulb connector, as shown in the video.

At this point, remove the rear light and replace it with the new one, making the connection and securing it properly to the body, then reattach the plastic cover of the trunk!


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Mercedes A-Class
How to replace the rear headlight bulb of the Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. the rear headlight bulb of the Mercedes A-Class. To access the bulb, you need to open the trunk and remove the side cover located in the direction.. …
How do you disassemble the rear taillight of the Mercedes A-Class w177?
How do you disassemble the rear taillight of the Mercedes A-Class w177?
Mercedes Classe A (2018-2026 / W177) .. disassembly of the rear light of the Mercedes Classe A w177, a car that can be seen in the video uploaded here, generally follows the operating scheme.. …
How to replace the rear headlights bulbs of the Mercedes A-Class
How to replace the rear headlights bulbs of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replace the rear headlight bulb of the Mercedes Class A model W 169. Pull the handbrake and turn off the engine, get out of the vehicle and start the.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos