Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a 2012 Mercedes-Benz C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the headlight bulb on a 2012 Mercedes-Benz C-Class is simple and quick to do yourself. To replace the bulb, remove the screws located on the headlight grille to take it out. After removing the headlight cover, disconnect the connector and proceed with replacing the bulb.

Follow the same steps on the right front headlight and install the headlight back into its housing. After installing the bulb, turn on the vehicle's lights to test their operation.

If the lights do not work correctly, check the condition of the fuse.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Mercedes C-Class
How to Replace the Headlight Bulb on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. you begin, open the hood of your Mercedes C-Class. Start by unscrewing and removing the rear cover of the bulb. Next, disconnect the electrical connector,.. …
Replacing the Headlight Bulb on the Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) .. replacing the headlight bulb on the Mercedes C-Class W203. First, open the hood and start by removing the plastic cover behind the headlamp; then disconnect.. …
How to Replace the Headlight Bulb on a Mercedes C-Class
How to Replace the Headlight Bulb on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. Replacing the headlight bulb on a Mercedes C-Class model W204 is a very simple task, achievable in four steps. Follow these steps: - Open the hood;.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos