Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of a Mercedes B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Front bumper

Disassembling the front bumper of this car is not a too complicated process, we just need to be careful to remove all the screws that hold it in place. First, we start by removing the screws located under the right and left fenders, two on each side, then we continue by removing the fastening clips and screws under the bumper, finally we remove the upper screws on the sides of the radiator grille. Once done, we can start to detach the front bumper and then disconnect the connectors of the fog lights and finally remove the bumper completely.

Posted on 31 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the bumper of the Mercedes Class B w245?
How do you remove the bumper of the Mercedes Class B w245?
Mercedes Classe B (2005-2011 / W245, MK 1) .. to disassemble the front bumper of the Mercedes Class B w245. First, we need to remove the clips from the front wheel arches and reach the rear pins.. …
Removing the Front Bumper of a Mercedes B
Removing the Front Bumper of a Mercedes B
Mercedes Classe B (2011-2019 / W246, MK 2) .. How to remove the front bumper of a Mercedes B? Start by lifting the front bonnet and removing the retaining.. …
How to Remove the Rear Bumper of a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. To remove the rear bumper of a Mercedes-Benz B-Class, raise the vehicle to work comfortably underneath. Ensure that the lifting system is secure; do.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos