Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the bumper of the Mercedes Class B w245?

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Front bumper

We follow all the steps to disassemble the front bumper of the Mercedes Class B w245. First, we need to remove the clips from the front wheel arches and reach the rear pins of the bumper, then we lower ourselves under the vehicle, locate the lower pins and remove them, we move to the top of the bumper and also unscrew the locking pins. Once freed, we can now start pulling and detaching it from the body, but not forgetting that the job is completed by disconnecting the rear connectors of the power cables.

Posted on 6 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear bumper of the Mercedes B-Class
Disassembly of the rear bumper of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) Below are the main instructions for disassembling and replacing the rear bumper of the Mercedes Class B. First, lift the vehicle and start unscrewing…
How to Remove the Rear Bumper of a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) To remove the rear bumper of a Mercedes-Benz B-Class, raise the vehicle to work comfortably underneath. Ensure that the lifting system is secure; do …
How to remove the front bumper of a Mercedes B-Class
How to remove the front bumper of a Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) Disassembling the front bumper of this car is not a too complicated process, we just need to be careful to remove all the screws that hold it in plac…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos