Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : Removing the Mercedes B200 W245 window lifter push button panel

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Window lift button
Operation: Removing the Mercedes B200 W245 window lifter push button panel

In this video tutorial we will see how to disassemble the window control panel of a Mercedes B-Class W245 first series, in simple steps. First of all we open the front door and we go to remove the plastic covers of the door panel, in order to unscrew the screws that we find below and to be able to remove the panel using a torx screwdriver; then we go to unscrew the fixing screw of the push-button panel itself and disconnect its electrical connector to remove it, as shown in the video. For reassembly, just apply the reverse disassembly procedure!


Posted on 30 March 2024 by ScegliAuto



Removing the Mercedes B-Class W245 window control panel
Mercedes Classe B (2005-2011 / MK 1, W245) In this video tutorial we will see the main instructions on how to disassemble and replace the window control panel of a Mercedes B-Class W245. First
Replacement of the wipers of the Mercedes B200
Mercedes Classe B (2005-2011 / MK 1, W245) Efficient windscreen wipers ensure good visibility in the event of rain, and it is therefore necessary to replace them as soon as they do not perform
How to replace the window regulator on the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) If any device is not activated by pressing the push-buttons of the window-raising controls on the door panel, it is likely that some micro switches i

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos