Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located in the Mercedes B200?

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

If you want to connect a diagnostic tool to your Mercedes B200, but you don't know where the OBD2 port is located, then all you have to do is follow the steps described in the following guide. First, you need to reach the driver's seat and make sure your Mercedes B200 is turned off, then shift your attention to the bottom of the dashboard, below the steering wheel.

At this point, you can locate the OBD2 port you were looking for. Finally, connect the diagnostic tool to it and the procedure is successfully completed.


Posted on 28 July 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Mercedes B200
How to Replace the Key Battery on a Mercedes B200
Mercedes Classe B (2011-2019 / MK 2, W246) If you own a Mercedes B200 and want to know how to correctly replace the battery inside the key, follow the instructions in this guide. First, locate…
How to Replace the Auxiliary Belt (Poly V) on a Mercedes Benz B200?
How to Replace the Auxiliary Belt (Poly V) on a Mercedes Benz B200?
Mercedes Classe B (2005-2011 / MK 1, W245) This short video tutorial explains how to remove and replace the auxiliary belt (in this case, a Poly V belt) on your Mercedes Benz B200. After raisi…
Replacing the Wipers on the Mercedes B200
Replacing the Wipers on the Mercedes B200
Mercedes Classe B (2005-2011 / MK 1, W245) Efficient wipers ensure good visibility in case of rain, so it is necessary to replace them as soon as they no longer perform their function correctl…

Other guides you may be interested in

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the Mercedes B-Class yaw sensor located? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos