Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear bumper in the Mercedes GLS?

Model: Mercedes Gls X166 - Years 2013-2019
Part: Rear bumper

In this tutorial we can see how to remove the rear bumper on the Mercedes GLS, an extremely simple and fast operation. First of all, open the trunk door, then go to a wheel arch and, using pliers, remove all the plastic rivets inside. Repeat the operation on the opposite side, unscrew with a 10mm socket wrench the 6 bolts on the lower edge of the bumper and, grabbing it from one of the two ends, separate it from the frame. At this point, all that remains is to disconnect the various connectors indicated and install the replacement following the reverse procedure.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Gls (2020-2026 / X167) Below we will see the instructions that will allow us to reset the maintenance service light of the Mercedes GLS. First of all, we get on board the v…
Mercedes Gls (2020-2026 / X167) To reset the "Service" light on a Mercedes GLS, turn on the instrument panel without starting the engine. Use the controls on the steering wheel to n…
Mercedes Gls (2013-2019 / X166) In this video, you can see where the battery is located in the Mercedes GLS and how to access it, which is useful if you need to replace it, a very s…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos