Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear sofa of the Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Brake rotors

See other generations:
Video tutorial

In a few simple steps, we will see the process of disassembling the rear seat of the Mercedes E-Class. First, we open the rear doors of the car and start pulling the rear seat upwards with force, in order to detach it and then remove it from the cabin; then it will be possible to remove, if necessary, also the backrests, unscrewing all the fixing bolts found at their base, as shown in the video.

At this point, we reassemble the backrests and the rear seat, applying the reverse process of disassembly!


Posted on 23 March 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Seats of the Mercedes E-Class
How to Remove the Rear Seats of the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. the bench and the backrests, of the Mercedes E-Class. First, open the rear doors and begin lifting the rear bench until you detach it from the hooks.. …
How to replace the battery of the Mercedes E-Class W210
How to replace the battery of the Mercedes E-Class W210
Mercedes Classe E (1995-2002 / W210) .. see how to replace the battery of the Mercedes E-Class W210 version. In most cars, the battery is located in the engine compartment or in the trunk. In.. …
Replacing the Fuel Pump on the Mercedes E-Class
Replacing the Fuel Pump on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replacing the fuel pump on the Mercedes E-Class. First, open the rear doors of the vehicle and start removing the rear seat to access the fuel.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos