Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel door and cap of the Mercedes GLA

Model: Mercedes Gla W156, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to open the fuel door and then remove the tank cap of the Mercedes GLA. First of all, make sure that all the door locks are open by pressing the key's opening button; then press on the right side of the fuel door to open it, then unscrew the tank cap counterclockwise to remove it, as shown in the video.

At this point, refuel at the gas station, finally screw the cap clockwise; finally, close the fuel door!


Posted on 24 May 2025 by ScegliAuto


Related tutorials

How to Open the Fuel Flap on a Mercedes GLA?
How to Open the Fuel Flap on a Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) In this tutorial, you will see how to open the fuel flap on a Mercedes GLA, a very simple operation that follows the standard procedure typical of mo…
How to remove the door handle on a Mercedes GLA
How to remove the door handle on a Mercedes GLA
Mercedes Gla (2020-2026 / MK 2, H247) To remove the door handle on a new generation Mercedes GLA, open the door and locate the small plastic cap on the side edge, corresponding to the out…
Replacing the Fuel Pump on the Mercedes GLA
Replacing the Fuel Pump on the Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) Today, follow the procedure for dismantling and replacing the fuel pump on the Mercedes GLA as outlined below. First, raise the vehicle and begin rem…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos