Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure warning light in the Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, we can see how to reset the tire pressure warning light in the Mercedes C-Class, an extremely simple and quick operation, to be carried out only once the correct pressure of each tire has been restored following the instructions in the manual.

Firstly, we enter the interior of the car, then insert the key and turn on the instrument panel.

Next, we reach the general menu by pressing the right arrow, go to the "SERV" tab, enter "Tyre pressure" and press the "OK" button. At this point, all that's left to do is confirm the reset and complete the procedure by restarting the vehicle.


Posted on 2 June 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. In this tutorial we can see how to reset the tire pressure warning light in the Mercedes C-Class, an extremely simple and quick operation,.. …
Mercedes Classe C (2021-2026 / W206) .. reset the TPMS warning light on the Mercedes C-Class. Before resetting, it is necessary that all four tires are at the correct pressure; then get in.. …
Mercedes Classe C (2007-2013 / W204) .. In this tutorial we can see how to reset the tire pressure warning light in the Mercedes C-Class, an extremely simple and quick operation,.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos