|
Do it yourself
| |||
| ||||
How to remove the center console of the Mercedes SLK R170
Model: Mercedes Slk
MK 1, R170
- Years:
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Video tutorial
Let's see how to remove the central console of the Mercedes SLK R170: with a plastic spatula, lever under the armrest cover near the gear/handbrake; lift gently to release the clips. Unscrew the front screws; there are two torx screws, one on each side, above the removed armrest covers. Two rear screws will be hidden under the rear part of the console. Now disconnect the mechanical connections, removing the yellow vacuum tube: just pull it gently to release it. There are also electrical connectors for the mirrors, the cigarette lighter, and any other connected accessories. Now lift the rear part of the console to release the remaining clips (the handbrake must be lifted to facilitate the operation). The clips break easily, so, as recommended in the video, to repair the damaged parts it is advisable to use a hot glue gun. This operation is useful if you want to replace the cigarette lighter, access the handbrake or electrical cables; if you want to install accessories or if you want to do cleaning operations.
Posted on 26 July 2025 by ScegliAuto
Related tutorials
Mercedes Slk
(1997-2004 /
MK 1, R170)
This guide provides the main instructions useful for removing and replacing the centre console of the Mercedes SLK. First, get inside the vehicle and…
Mercedes Slk
(1997-2004 /
MK 1, R170)
Hello everyone! Today, change the oil on the Mercedes SLK R170, using a 5W-30 lubricant as recommended for this model. Before draining the oil, open …
Mercedes Slk
(1997-2004 /
MK 1, R170)
In this video, learn how to set the clock on the Mercedes SLK R170. Gently pull out the knob located between the two dials on the dashboard. Slightly…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |