Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the front headlight of the Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

Below we will see the necessary instructions on how to disassemble and replace the front headlight of the Mercedes Classe A. First, we open the hood of the car and start gently detaching the bumper on the sides, unscrewing the screws of the front wheel arch; in this way we will have access to all the screws of the headlight, which we will then unscrew, as shown in the video.

At this point, disconnect the electrical connector of the bulbs to remove the front headlight, replacing it with the new original one; check the functioning of the lights before fixing the bumper again.


Posted on 1 September 2025 by ScegliAuto


Related tutorials

How to Remove and Replace Headlight Bulbs on a Mercedes A-Class
How to Remove and Replace Headlight Bulbs on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. the front headlight bulbs on a Mercedes A-Class? Let's see how to proceed: open the hood by pulling the lever located at the bottom right of the.. …
How to Remove and Replace the Headlight on a Mercedes A-Class
How to Remove and Replace the Headlight on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the front headlights on a Mercedes A-Class, following the instructions below. First, open the hood of your car and start by removing the front.. …
How to replace the headlight bulb in a Mercedes-Benz A-Class
How to replace the headlight bulb in a Mercedes-Benz A-Class
Mercedes Classe A (2012-2018 / W176) .. replace the headlight bulb in a Mercedes-Benz A-Class is to open the hood and turn the wheels inward if you need to replace the right headlight bulb... …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos