Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Removing the rear door panel

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Door panel
Operation: Removing the rear door panel

To carry out the following repair, the following tools are required: - small fixed screwdriver; - 15 mm torx screwdriver; - 25 torx screwdriver; - tool releases pressure locks; - flashlight: First unscrew the fixing screw of the plastic cover of the lock and remove it. Using a small fixed screwdriver as a lever, unclip the plastic cover of the handle and unscrew the two screws below. Using the special tool or a plastic lever, release the pressure clips along the edges of the panel and pull it upwards to remove it from the scraper gasket.


Posted on 1 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos