Do it yourself
Frequently asked questions about cars and motorcycles

How to Activate the Air Recirculation Mode of the Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: A/C controls

See other generations:
Video tutorial

In this guide, you will find instructions to activate the internal air recirculation mode of the Mercedes C-Class. First, get inside the vehicle and turn on the air conditioning; then set the desired fan speed and press the air recirculation button located next to the temperature knob, as shown in the video.

With recirculation activated, the same air inside the cabin will be conditioned, preventing outside air from entering; simply press the button again to deactivate this mode.


Posted on 17 May 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. of the airbag system in the Mercedes-Benz C-Class, following the instructions below. In this vehicle, the passenger airbags activate and deactivate.. …
Mercedes Classe C (2000-2007 / W203) .. front passenger airbag system in the Mercedes C-Class operates. The front passenger airbag is automatically activated when a passenger is detected by.. …
Mercedes Classe C (2007-2013 / W204) .. the headlight washer mechanism on the Mercedes C-Class. First, get inside the vehicle and turn on the ignition by inserting the key into the ignition.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos