|
Do it yourself
| |||
| ||||
How to Reactivate the RUN FLAT Indicator on a Mercedes Class B W245
Model: Mercedes Classe B
W245, MK 1
- Years 2005-2011
The Run Flat system warning light on the Mercedes Class B W245 alerts us when the pressure drops below a certain level. It is part of the Tyre Pressure Monitoring System (TPMS) and in most cases, it remains lit even after repairing or inflating the tyres. Therefore, you need to reactivate the indicator with a simple procedure. Inflate the tyres to the correct pressure, turn on the ignition, and press the "TPM" button located to the left of the steering wheel, below the air vents. It has the icon of a cross-section tyre: hold it down for 2-3 seconds. You will hear a "beep" and see the light flash; release the button and the light should turn off.
Posted on 29 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe B
(2005-2011 /
W245, MK 1)
To reset the tyre pressure warning light on a Mercedes-Benz B-Class, first inflate the tyres to the recommended pressure value, which is indicated on…
Mercedes Classe B
(2005-2011 /
W245, MK 1)
These brief instructions will show us the process of resetting the tire pressure warning light (TPMS) of the Mercedes Class B, as well as the Class A…
Mercedes Classe B
(2005-2011 /
W245, MK 1)
To clear the tire pressure warning light displayed on the Mercedes Class B, you must first inflate the tires to the optimal pressure value: this valu…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 1.202
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
