Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Light in a Mercedes GLC?

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part:

In this tutorial, you will see how to reset the tire pressure light in a Mercedes GLC, an extremely simple and quick operation to perform only after restoring the correct pressure in each tire according to the instructions in the manual. First, go inside the cabin, then turn on the ignition and navigate to the odometer screen. Next, access the main menu using the controls on the steering wheel, enter "Service", then "Tire pressure", scroll down the screen, and press the "OK" button. To complete the procedure, simply restart the vehicle.

Posted on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on the Mercedes GLC?
How to Reset the Tire Pressure Light on the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this tutorial, you will see how to reset the tire pressure light on the Mercedes GLC, a very simple and quick operation to perform only after rest…
How to reset the "Service" indicator on a Mercedes GLC?
How to reset the "Service" indicator on a Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) To reset the "Service" light on a Mercedes GLC, start by turning on the instrument panel without starting the engine. Use the buttons located on the …
How to Install Side Steps on a Mercedes GLC
How to Install Side Steps on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Start by removing the clips that secure the plastic door sills on your Mercedes GLC, then remove the corresponding lower bolts. Once done, open the d…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos