Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the air fan on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Interior blower
Operation: How to replace the air fan on Mercedes C-Class

Is the air fan damaged? We see the disassembly of the fan resistor on a BMW 5. We remove the glove box located in the dashboard. With a screwdriver we unscrew the cover (where the air fan is present). We disconnect the power supply terminal and extract the fan from inside the dashboard. We insert a new air fan (we connect the power supply clamp to the clamp). We mount the cover drawer and tighten the screws. We check the correct assembly of the pieces, we test the correct functioning of the fan with the ignition of the air controls.


Posted on 4 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2000-2007 - Why is the cooling fan of the Mercedes C-Class W203 not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos