Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Air Filter on Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Cabin air filter

See other generations:
Video tutorial

Replace the air filter on a Mercedes A-Class. Open the hood, unclip the plastic fasteners of the cover: use a lever to remove the plastic under the windshield (remove the securing screws above the container).

Use a screwdriver to remove the cabin air filter. Insert the new air filter into the container (insert it without bends).

Install the filter cover and tighten the screws, then clip the plastic fasteners back in place. Close the hood after installing the filter.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to replace the air filter in the Mercedes A-Class W176
How to replace the air filter in the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. replace the engine air filter in your Mercedes A-Class W176, follow these steps to complete the task independently and without difficulty. First, turn.. …
How to Replace the Air Filter on Mercedes A-Class W168
How to Replace the Air Filter on Mercedes A-Class W168
Mercedes Classe A (1997-2004 / W168) .. Replacing the air filter on a Mercedes A-Class W168 is a relatively simple task. Follow these steps. Open the hood: make sure the engine is cool.. …
How to Replace the Cabin Filter on a Mercedes A-Class
How to Replace the Cabin Filter on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. do you replace the cabin filter on a Mercedes A-Class? Let's see how to disassemble and replace the parts: Remove the screws securing the plastic under.. …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos