Do it yourself
| ||||
|
Mercedes Slk - Video tutorial
Model: Mercedes Slk
MK 2, R171
- Years 2004-2011 Prerequisite: Reverse TORX keys are required for removal. It is not recommended to try to remove the screws with Allen sockets because the heads of the pins could be damaged. You will also need a size 17 open or socket wrench and a small screwdriver. Procedure: slide the seat completely back and remove the two front pins of the skids. Then slide the seat fully forward and remove the two rear pins of the skids. This phase is very delicate because the seat is no longer firmly locked and tends to move / fall. Maximum attention, therefore, to safety. Tilt the seat back forwards and carefully disconnect the airbag / seat heating plugs. The cables and connectors are very fragile. Pull the seat out of the vehicle. For ease of operation, remove the seat belt when the seat is already out of the vehicle. With a screwdriver remove the plastic cap and unscrew the pin with a 17 key.
Posted on 12 December 2023 by ScegliAuto
Where are the fuses located in the Mercedes SLK?
Mercedes Slk (2004-2011 / MK 2, R171) In the Mercedes SLK there are three fuse boxes inside the car: the first one is located on the left side of the dashboard, accessible only by opening
How to remove the leather seat of a Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) Today we are going to see how to take out the leather seat of our Mercedes SLK. Unfortunately the leather seats are very easy to ruin even if they ar
Where are the fuses located in the Mercedes SLK?
Mercedes Slk (2011-2016 / R172, MK 3) The fuses of the Mercedes SLK are divided within the appropriate fuse boxes that are installed on the vehicle: in this car model, two boxes containin Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.072
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |