Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spark Plugs on a Class A

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Spark plugs

See other generations:
Video tutorial

Remove the spark plugs from the Mercedes Class A? Disassemble the components in the engine compartment to access the spark plugs. Here’s how to do it. Remove the soundproofing panel covering the engine head using a socket wrench.

Next, remove the coil bar. Unscrew the spark plugs with your socket wrench, pull them out of the head, and check for any damage. Take the new spark plugs and guide them into the engine head with the extension of your socket wrench, tighten them securely, and reattach the coil bar. Reinstall the engine soundproofing panel.

Start the engine and check if the car runs.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs on a Mercedes A-Class
How to Replace Spark Plugs on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) Let's look at removing the spark plugs on the A-Class. Pull the hood release lever and lift the hood, securing it. Remove the engine cover panel and …
How to Replace the Spark Plugs in a Mercedes A-Class
How to Replace the Spark Plugs in a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) Release the hood from the designated lever, then lift it and secure it with the appropriate prop. Now, you need to remove the entire injection block …
How to Replace Spark Plugs on Mercedes A-Class
How to Replace Spark Plugs on Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) If you have engine starting issues, it is preferable to replace the spark plugs. Here’s how to do it. Pull the hood release lever located on the lowe…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos